Total: USD 0.00
Taxes and shipping calculated at checkout
Assembly
Your Magnetic Shoe Case comes together in just a few easy steps.
The magnetic cubes in the corner of the panels lock into position, forming the case. With this mechanism, cases are stackable and secured safely to one another.
To enjoy our products at their best, please read and follow our recommended care and safety instructions.
Steps
Front door
Step 1
Start on a clean and flat surface.
We recommend a smooth cloth for ease
of assembly.
First, place the base panel
as the foundation.
This panel has a cube
in each corner for screws and
magnets
(door panel)
to be fastened later.
Step 2
Place the two side panels
on each side.
Secure a screw into each bottom corner,
fastening the side panels with the cubes
on the base.
Step 3
Place the back panel
and secure it.
Secure a screw into each bottom corner to
fasten it with the cubes
on the base.
Step 4
Place the top panel
and secure a screw
into each corner,
fastening the top panel with the side and back panels.
Step 5
Finally, place the front panel
as the door.
This panel has
an opening that acts as the
handle.
This panel will automatically
fasten in place
with
magnets on its corners and
the cubes.
Side door
Step 1
Start on a clean and flat surface.
We recommend a smooth cloth for ease
of assembly.
First, place the base panel
as the foundation.
This panel has a cube
in each corner for screws and
magnets
(door panel)
to be fastened later.
Step 2
Place the two side panels
on each side.
Secure a screw into each bottom corner,
fastening the side panels with the cubes
on the base.
Step 3
Place the back panel
and secure it.
Secure a screw into each bottom corner to
fasten it with the cubes
on the base.
Step 4
Place the top panel
and secure a screw
into each corner,
fastening the top panel with the side and back panels.
Step 5
Finally, place the front panel
as the door.
This panel has
an opening that acts as the
handle.
This panel will automatically
fasten in place
with
magnets on its corners and
the cubes.